Swann Home Security System SW212 HXD User Manual

plug&playsecurity  
Advanced security made easy™  
Home Outdoor Security Kit  
1 Real & 1 Imitation Camera  
PNP-150/2D™  
Quick Start Guide  
SW212-HXD  
SR212-HXD-10006-040609  
 
Table of Contents  
Before You Begin  
2
Table of Contents  
3
Package Contents  
3
Connection Guide  
4-5  
6
Viewing the Camera on Your TV or VCR  
Tips & Suggestions  
6
Troubleshooting Guide  
Helpdesk / Technical Support Details  
Warranty Information  
7
8
8
Package Contents  
PNP-150 Security Camera  
PNP-150 Imitation Camera  
Camera Stand x 2  
Power Adapter  
Quick Start Guide  
Security Stickers  
BNC Extension Cable  
BNC to RCA Adapter  
Mounting Hardware  
plug&playsecurity  
Advanced security made easy™  
Home Outdoor Security Kit  
1
Real  
&
1
Imitation Camera  
PNP-150/2D™  
Quick Start Guide  
SW212-HXD  
SR212-HXD-10006  
EN140109  
3
 
Connection Guide  
Connect the camera  
cable to the Extension  
1Cable  
2A. Connecting Directly to TV  
Connect the BNC to RCA  
Adapter and connect to Video  
2Input on your TV or VCR  
INPUT  
4
 
Plug in the Camera  
Power Adapter  
4
Connect the Extension  
Cable to the Power  
3Adapter  
2B. Connecting to Your Existing DVR  
Connect the BNC Extension  
Cable to an open channel on  
2the back of the DVR  
5
 
Viewing the Camera on Your TV or VCR  
Viewing the PNP-150 on a TV  
After connecting the PNP-150 Camera directly to your TV and powering it on as  
described on page 4, tune the TV to the correct input channel.  
On your TVs remote control, the input button is usually labelled as Input, Source,  
A/V, Channel 0, AUX etc.*  
Viewing and Recording the PNP-150 on a VCR  
Connect the PNP-150 into an available input channel on your VCR in the same  
manner as the TV connection listed on page 4. Turn on your VCR and TV as if  
you were about to play a VCR tape.  
On your VCRs remote control, find the input button with is usually labelled as L1,  
L2, Input, Source, A/V, Channel, 0, AUX etc.* Insert a tape and push record to  
record the camera.  
*Consult the TV or VCR instruction manual for details about changing input  
channels  
Tips & Suggestions  
Never aim the camera directly at the sun as it may damage the sensor  
Test all connections and ensure the camera is working correctly prior to permanent  
installation  
Install cameras high enough or out of reach to avoid tampering  
Place Security Stickers in a visible location to alert potential thieves they are being  
monitored  
Mix real cameras with dummy cameras to give the impression of increased security  
coverage  
Purchase a Swann DVR to record multiple cameras simultaneously and easily moni-  
tor your property.  
Place cameras in high traffic areas such as doorways to maximise security  
Use only the included Power Supply and do not modify or cut wires  
6
 
Troubleshooting Guide  
Problem: I can’t see the camera on my TV.  
Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the  
correct input channel.  
Problem: When I view my camera at night I only see a bright spot and no image.  
Solution: Night Vision will reflect when shining through a window. Move the  
camera to the other side of the window or another location.  
Problem: The BNC Extension Cable will not connect to my TV.  
Solution: Connect the BNC to RCA adapter to the end of the Extension Cable  
and plug into the TV.  
Problem: On my Swann DVR, Video Loss appears where my camera should be.  
Solution: Check the Extension cable is securely connected to the camera and  
check the connection is secure on the back of the DVR. Also ensure the camera  
has power by trying a second power outlet.  
Technical Specifications  
Video  
Image Sensor  
1/3” Color Super CMOS  
Video Quality  
400 TV Lines  
Number of Effective Pixels  
Minimum Illumination  
Day/Night Mode  
White Balance  
NTSC: 510 x 492 / PAL: 628 x 582  
0 Lux (IR on)  
Color during day / switches to B&W night  
Automatic  
Signal / Noise Ratio  
Electronic Shutter  
Gain Contr=ol  
Backlight Compensation  
Lens  
> 50dB  
1/60 - 1/15,000 NTSC / 1/50 - 1/15,000 PAL  
Automatic  
Yes  
6mm  
Viewing Angle  
53 degrees  
Night Vision  
Number of Infra-Red LEDs  
Infra-Red Wavelength  
Night Vision Distance  
Infra-Red LED Life  
30  
850nm  
Up to 30ft / 9m  
10,000 hours  
General  
Operating Power  
DC 12V  
Operating Temperature  
Body Construction  
Dimensions - Camera  
Dimensions – Stand  
Weight – Camera & Stand  
-10°C ~ 50°C / 14°F ~ 122°F  
ABS Plastic  
5.5” x 2.8” x 2.8” / 140mm x 70mm x 70mm  
4.5” x 2.3” x 2.3”/ 120mm x 60mm x 60mm  
0.5lbs / 235g  
7
 
Helpdesk / Technical Support Details  
Swann Technical Support  
All Countries E-mail: [email protected]  
Telephone Helpdesk  
USA toll free  
1-800-627-2799  
AUSTRALIA toll free  
1300 138 324  
(Su, 2pm-10pm US PT)  
(M-Th, 6am-10pm US PT)  
(F 6am-2pm US PT)  
USA Exchange & Repairs  
562-777-2551  
(M 9am-5pm AUS ET)  
(Tu-F 1am-5pm AUS ET)  
(Sa 1am-9am AUS ET)  
NEW ZEALAND toll free  
0800 479 266  
(M-F, 9am-5pm US PT)  
INTERNATIONAL  
+61 3 8412 4610  
current time in Melbourne, Australia compared to your local time.  
Warranty Information  
Swann Communications USA Inc.  
12636 Clark Street  
Swann Communications PTY. LTD.  
Building 4, 650 Church Street,  
Richmond, Victoria 3121  
Australia  
Santa Fe Springs CA 90670  
USA  
Swann Communications warrants this product against defects in workmanship and material  
for a period of one (1) year from it’s original purchase date. You must present your receipt  
as proof of date of purchase for warranty validation. Any unit which proves defective during  
the stated period will be repaired without charge for parts or labour or replaced at the sole  
discretion of Swann. The end user is responsible for all freight charges incurred to send the  
product to Swann’s repair centres. The end user is responsible for all shipping costs incurred  
when shipping from and to any country other than the country of origin.  
The warranty does not cover any incidental, accidental or consequential damages arising  
from the use of or the inability to use this product. Any costs associated with the fitting or  
removal of this product by a tradesman or other person or any other costs associated with  
its use are the responsibility of the end user. This warranty applies to the original purchaser  
of the product only and is not transferable to any third party. Unauthorized end user or  
third party modifications to any component or evidence of misuse or abuse of the device will  
render all warranties void.  
By law some countries do not allow limitations on certain exclusions in this warranty. Where  
applicable by local laws, regulations and legal rights will take precedence.  
© Swann Communications 2009  
 

Sharp CRT Television 27F543 User Manual
Shure Microphone BETA 91t User Manual
Sonance Stereo System VCLL R User Manual
Sony MP3 Player A845 User Manual
Sony Projector VPL BW5 User Manual
Sony Turntable PMPK DJ9000 User Manual
Sterling Plumbing Outdoor Shower 71110112 User Manual
Sunbeam Hot Beverage Maker KE5400 User Manual
Sunbeam Hot Beverage Maker KE9200S User Manual
Tannoy Cell Phone C902 User Manual